Search Results

Clerical & Promotional Items

Accessories built to work with your abrasive tools and abrasives. This includes mandrels, backing pads, pastes, mounting hardware and much more.

Adhesives with either an acrylic or epoxy base that are high strength. Excellent for industrial and structural applications.

Tools that dispense a precise amount of adhesive or sealant as required.

Spouts that attach to the end of adhesive products or guns to either mix the product or dispense it in a controlled manner.

Portable compressors that can be easily carried by hand by their built-in handle.

Anchors built for fastening into asphalt surfaces.

Anchors built to attach objects or structures to concrete.

Anchors built for installing straight cut rebar and threaded rod into concrete.

Anchors built for light to heavy-duty anchoring in solid concrete base material. These female type anchors require setting tools for expanding the anchor.

Anchors built from two-part epoxy as a chemical version of a mechanical anchor. Excellent for securing rod into concrete.

Anchors built from metal used in light wood-frame construction for joining studs, joists, rafters and more.

Anchors built specifically for holding heavy loads without breaking or coming loose.

Anchors built for fastening to gypsum board, paneling, drywall plasterboard, and other hollow materials.

Anchors built for securing insulation to a variety of materials.

Anchors built to be used along with standard lag screws to anchor into concrete, brick and block.

Anchors built for light duty fastening into concrete, brick or block with a tamper-resistant finish.

Anchors built to be the fastest way to hang plumbing pipe, light fixtures, sheet metal duct, display fixtures and more.

Anchors built from threaded rod with a nut and washer pre-installed for quick installation.

Anchors built to be installed into a drilled hole and screwed into place with a setting tool. These anchors are internally threaded.

Anchors built for fast and simple installation into drywall.

Anchors built to fasten to concrete, brick or block. Bolts used with these anchors can be removed and replaced without affecting the anchor.

Anchors built for light to medium-duty anchoring to concrete, brick or block base material.

Anchors built for use in hollow concrete blocks or any other hollow base material.

Unsorted products needing to be put into proper categories.

Anchors built for being inserted into drywall to secure fasteners used for hanging objects.

Anchors built for light to heavy-duty anchoring into solid concrete.

Accessories built for aiding in the installation of anchors.

Wearable Gear with shoulder straps that allows it to be carried on your back.

Power Tool Accessories built to hold and extend a variety of bits.

Bolts built from low or medium carbon steel. Primarily used with wood.

Bolts built from medium carbon steel and are quenched and tempered. Primarily used with wood.

Bolts built from a steel alloy with 17-19% Chromium and 8-13% Nickel. The finish is self-protecting and is excellent in corrosion resistance.

Bolts with a heavy coating of zinc. Provides considerably enhanced corrosion resistance over zinc plating.

Bolts with no finish on them. They offer no corrosion resistance and will rust over time.

Bolts with threads on both ends. One end is a lag bolt thread, the other is a machine thread. Typically used in a pre-drilled hole in wood structures.

Bolts with a heavy coating of zinc. Provides considerably enhanced corrosion resistance over zinc plating.

Bolts built with a minimum tensile strength of up to 120,000 psi - For critical applications requiring greater fastener strength.

Bolts made from silicon bronze are stronger than brass, do not rust, and resist salt corrosion.

Bolts with the threading all the way to the base of the head of the bolt.

Bolts with a lag screw thread and built from a steel alloy that resists staining, rust, and corrosion. This provides superior corrosion resistance.

Bolts with a lag screw thread and a heavy coating of zinc. This provides excellent corrosion resistance.

Bolts with a lag screw thread and coated in zinc. This provides good corrosion resistance.

Bolts constructed from sheet metal and have a slotted head. Sometimes referred to as machine screws. Commonly used in wood-burning stoves.

Abrasives built in the shape of a thin, wafer-like wheel that often has radial fibers reinforcing it for added strength and are self-sharpening with wear.

Unsorted products needing to be put into proper categories.

Power tools built to drive smaller gauge nails into wood, plastic or masonry.

Button Head Socket Cap screws are finishing screws built with a wider bearing surface usually used for cosmetic applications.

Cable ties, tie-wraps and hooks are fasteners built for holding together electric cables and wires.

Fasteners built to hang cable and conduit.

Cement Board Screws are usually built with a flat or wafer head and are intended to attach cement board to wood or metal studs.

Abrasives built in a continuous loop used to achieve smooth and consistent finishes. Very economical choice and durable.

Abrasive discs with a hook & loop (Velcro) backing are tear resistant, generate less heat during use and provide quicker change times.

Fasteners built in a continuous row for ease of use and quick installation times.

Tool kits containing a variety of different tools to complete a project.

Anchors built to be installed before concrete is poured for a wide variety of attachments and fastening options.

Concrete Screws are built for use in concrete or masonry applications usually include a corrosion coating and are commonly blue in color.

Cordless Power Tools built to extrude various materials contained in a tube or sausage roll by pushing the product through a nozzle.

View all Combo Kits that include 12 Volt Cordless Power Tools. 

View all Combo Kits that include 18 Volt Cordless Power Tools.

View all Combo Kits that include 20 Volt Cordless Power Tools.

All 12 Volt Drills & Drivers. This includes all brands and variations such as Joist Drills, Hammer Drills, Impact Drivers, Drill/Drivers and more.

All 18 Volt Drills & Drivers. This includes Joist Drills, Hammer Drills, Impact Drivers, Drill/Drivers and more.

All 20 Volt Drills & Drivers. This includes joist Drills, Hammer Drills, Impact Drivers, Drill/Drivers and more.

All 36 Volt Drills & Drivers. This includes all brands and variations such as Joist Drills, Hammer Drills, Impact Drivers, Drill/Drivers and more.

All 60 Volt Drills & Drivers. This includes all brands and variations such as Joist Drills, Hammer Drills, Impact Drivers, Drill/Drivers and more.

Cordless Power Tools built to lift or lower a load by means of a drum or lift-wheel around which rope or chain wraps.

All 18 Volt Impact Tools. This includes all brands and variations such as Impact Drivers and Impact Wrenches.

All 18 Volt Screwguns. This includes auto-feed, drywall specific, and more.

Accessories built to work with your cutting tools. This includes lubricants, sharpeners and more.

Decking Screws are specialized fasteners built to resist corrosion in adverse outdoor environmental conditions.

Power tools built fully automatic or semi-automatic and use powder-actuated technology to join materials to hard substrates.

Dowel are cylindrical rods, often made of wood, plastic, or metal.

LOX features eight contact points--twice as many as the four points of Phillips and Robertson designs.

Driver bits built to drive a six-sided bolt head and is the most common bolt head style.

the Phillips Drive features two partial slots crossed at right angles.

The square drive system invented by P.L. Robertson more than a century ago.

Uncoated steel is cost-effective Socket Cap Screws built for High-Tensile strength applications usually used in indoor tool and die fixture applications.

Driver bits built to drive specialty style head types on fasteners and bolts.

Driver Bits & Bit Accessories - Screws

Unsorted products needing to be put into proper categories.

Drywall Screws are usually built with a bugle head and are intended to attach drywall to wood or metal studs.

Corded Power Tools built to deliver high torque output with minimal exertion. This includes Impact Drivers, Impact Wrenches and more.

Corded Power Tools built for woodworking to make grooves for joints, decorative molding and more.

Power Tools built to drill holes and drive screws and are typically not as heavy as a regular drill.

Power Tools built to lubricate the cutting blade with water to reduce chipping of tile and other materials while cutting.

Fasteners built with an eye hook on one end that has a shoulder built under the eye. Used to attach slings and other hardware.

Unsorted products needing to be put into proper categories.

Unsorted products needing to be put into proper categories.

Unsorted products needing to be put into proper categories.

Flat Head Socket Cap screws are built for high-tensile strength applications usually used for flush mounting applications.

Drill bits built specifically to cut through glass or tile while reducing the chances of chips or cracks.

Replacement Handles for all variations of hammers, mallets and sledges.

Unsorted products needing to be put into proper categories.

Anchors built by HangerMate® for a wide variety of applications.

Fittings such as hinges and other metal fasteners used to fasten things to other things for a variety of uses.

Hex Head Cap Screws are general purpose bolts built with a thick Hexagonal Head including a washer face on the shaft side of the head.

Hand tools built for turning fasteners with hex shaped socket heads and are in the shape of a key and fold within a base unit. Kits come with multiple drive sizes.

Blades that are built with a cylindrical shape which allows the blade to cut or bore out a hole in the workpiece.

Unsorted products needing to be put into proper categories.

Power Tools built to deliver high torque output with minimal exertion for quick high torque fastening of various materials. This includes both Corded and Cordless Impact Drivers.

Unsorted products needing to be put into proper categories.

Cutting tools built with a sharp edge used to cut a wide variety of materials.

Levels built to project a beam of light to produce a 180° or 360° chalk line either vertically, horizontally or both.

Lubricants built to stay on the surface in order to provide a smooth coating and help reduce friction.

Marking Paint contained in a aerosol can for easy application.

Anchors built from metal for the installation of many different types of fasteners.

Fasteners built to be used with metal framing in its construction and use.

Look like common nails but are thinner. They are less likely to split wood but have decreased holding power than common nails.

Nails usually over 6" long are called spikes and are made for general construction and to secure large dimensional lumber.

Nails used for securing gypsum wallboard or drywall. The shank is ringed giving these nails extremely high holding power.

Temporary and easily removable double headed nail

Nails that have a brad head that is intended to be used on trim work and other wood applications where the head needs to sunk under the surface to conceal the nail

Nails with large heads and thick, heavy shafts that are made to hold roofing materials in place.

Nails for securing shingles to various surfaces.

Nails that have been twisted creating a spiral pattern down the shaft that gives the nail excellent holding power and is over 7" long.

Unsorted products needing to be put into proper categories.

Nuts that are internally threaded hexagonal blocks built to be assembled in conjunction with a bolt or a screw and are used to fasten materials together.

Hex nuts with a domed end and are used to prevent the nut and bolt from stripping.

Hex nuts that are internally threaded and used to join threaded rod and pipe.

Hex nuts made from low or medium carbon steel. Commonly used in low-stress applications.

Hex nuts made from medium carbon steel. Most common nut and hardened to increase strength.

Hex nuts made from medium carbon alloy steel, are stronger than grade 5 and are used in demanding applications.

Hex nuts that are threaded opposite of standard (right-hand) nuts. For use with left threaded rod, bolts, and screws.

View All Locking Hex Nuts. This includes flange, kep, nylock, and more!

Hex nuts designed for use with machine screws and bolts.

Nuts that are self-locking and come with an attached spring. These nuts fit into a channel and prevent screws from loosening due to vibrations.

Nuts in the shape of a threaded steel insert. Typically used in softer materials and fits flush with the surface of the material.

Nuts that are easily turned by hand due to the wing extensions on either side of the nut. Usually used where minimal pressure is needed.

Organization Untis built to keep fasteners and tools in logical order.

Painter's tape is a thin paper tape built for masking areas.

Plastic Screw Caps are covers for the ends of screws to give them a decorative finish and to hide their appearance

Unsorted products needing to be put into proper categories.

Unsorted products needing to be put into proper categories.

Power Tools built with a sanding surface that moves in a very tight high speed orbital motion. This includes both corded & cordless Orbital Sanders.

Unsorted products needing to be put into proper categories.

Fasteners built to go through a hole in several materials then pressed down to secure the materials together.

Fully Threaded Rods are fasteners built to and stabilize and join together structural components.

Unsorted products needing to be put into proper categories.

Complete and partial sets of Screw & Bolt Extractors built to remove secured bolts and screws with broken heads.

Hand Powered Screwdrivers built to fit Hexagonal Head fasteners and bolts.

Ratcheting Screwdrivers are built to allow continuous tightening or loosening of a fastener.

Metal Screws built with a hex head and including a removable Ethylene Propylene Diene Monomer (EPDM) Gasket Washer.

Metal Screws with a flat top and built with a countersunk bearing surface.

Metal screws built with a hex head with a built-in washer.

Metal screws built with an oval style head.

Metal Screws with a Semi elliptical top surface built with a flat bearing surface.

Metal Screws with Low-profile semi-elliptical tops and a flat bearing surface.

Metal Screws with a countersunk flat top head and built with a cone-shaped bearing surface.

Screws built with a hex washer head and a self-drilling point.

Unsorted products needing to be put into proper categories.

Flat Top Wood Screws with a countersunk bearing surface.

Wood screws with a wide, flattish head that provides a large bearing surface to hold large wood projects together securely. 

Wood Screws with a round head that has a larger bearing surface underneath the head. 

Wood screws with a round/dome head that protrudes from the surface of the workpiece without any sharp corners.

Trim Head Wood Screws are a finishing screw built with a flat countersunk head. Trim Head screws have smaller heads that allow the screw to be easily hidden thus creating a more...

Unsorted products needing to be put into proper categories.

Socket Head Cap Screws are built for High-Tensile strength applications usually used in tool and die fixture applications.

Drill bits built for use with rotary hammers or hammer drills and is primarily for drilling holes at specific depths for drop-in anchors.

Small to Medium Storage Units built with ridgid plastic or metal.

Fasteners built for attaching structural attachments and components.

View our selection of structural nuts, bolts, and washers. These products meet strict structural specifications.

Structural screws are built for heavy-duty projects. They can take the place of more traditional fasteners & typically have more advanced features.

Strut Channel is a standardized light-duty structural support system used in the construction and electrical industries.

Fasteners built to help connect studs and other wall elements together.

Studs

Cutting tool sets that contain a selection of taps, dies or a combination of the two.

Tape - Barrier & Insulating

Various types of film that have adhesive on both sides for a wide variety of applications.

Duct Tape is built with scrim and is often coated with rubber or plastic.

Filament Tape (strapping tape or pressure-sensitive tape) is built with fiberglass filaments embedded to add high tensile strength.

Flagging tape is an non-adhesive tape usually used to create highly visible and very bright markings in a wide variety of applications.

Foam tape is built with a foam/sponge carrier and can be used in Gasketing, Weatherstripping, Mounting, Glazing, for bumpers and whole lot more.

Tape built with a foil backing that is used for shielding and covering thermal insulation and duct work.

Masking Tape (or sticky tape) is a type of pressure-sensitive tape made of a thin and easy-to-tear paper.

Packaging Tape (Box Sealing or Pressure-sensitive tape) is built to seal corrugated boxes. Adhesive is usually coated on a polypropylene or polyester film.

Sheathing (or Tuck) Tape is built to seal seams and edges of sheet based moisture barriers.

Tapes built to do a variety of specialized tasks.

Transfer tape (application tap or pre-mask) is built to transfer your cut vinyl graphics from the release liner to the substrate.

Unsorted products needing to be put into proper categories.

Handheld or stationary tools built to facilitate easy application of pressure sensitive tape.

TEK® Screws are fasteners built to drill or carve holes then tap threads in various materials.

Unsorted products needing to be put into proper categories.

Products that are built to seal the threads of fasteners and fittings or produce gaskets between components.

Traffic Safety Equipment is built to prevent workers from being killed or seriously injured while working around roads and highways.

Unsorted products needing to be put into proper categories.

Washers built to distribute the load and reduce friction and heat when being tightened between a nut, bolt, or screw.

Washers with a conical shape used as a kind of spring. For high load-bearing bolted joints and to add flexibility. They also allow for thermal expansion and vibrations.

Washers built with a large outer diameter for an extra wide bearing surface. They evenly distribute the load when used with bolts, screws, or nuts.

Washers that use a positive locking action when compressed in order to secure bolts or nuts to prevent them from loosening when exposed to vibrations.

Washers made with small sharp teeth either on the inside, outside or both, that bite into the fastener and material to stop it from coming loose due to movement or vibration.

Unsorted products needing to be put into proper categories.

Outdoor equipment built to transport water from one location to the next.

Twist-on wire connectors ( Marrettes™ ) are electrical connectors built to fasten two or more low-voltage electrical wires together.

Heavy Duty Handling Tools built for hauling, hoisting, logging and more.

Unsorted products needing to be put into proper categories.

Job site equipment built to help get projects done by providing a work surface to work on.

Unsorted products needing to be put into proper categories.