All Anchors
Internally Threaded - Self-Undercutting - Install into Pre-Drilled Hole with Power Tool and Setting Tool - For cracked and uncracked concrete
# Options: 1
$166.18
$166.18 /100PC
ADD TO CART
Internally Threaded - Self-Undercutting - Install into Pre-Drilled Hole with Power Tool and Setting Tool - For cracked and uncracked concrete
$166.18
Anchor Size
Drill Dia.
Length
PROD #
Price
8-10-12 x 1-1/4" - Economical plastic plug for light loads - Primarily used for solid substrates - Used in masonry, plaster, and even hollow walls
$23.24 /JUG
ADD TO CART
8-10-12 x 1-1/4" - Economical plastic plug for light loads - Primarily used for solid substrates - Used in masonry, plaster, and even hollow walls
$23.24 /JUG
ADD TO CART
Zinc Plated - Built with a long thread & has letter coded studs - IAPM ES® Listed ER-0373 - AC 193 (from Ø3/8" to 3/4) Tested - Length: 9" - Diameter: 1" - Head Marking: P
$1482.62 /100PC
ADD TO CART
Zinc Plated - Built with a long thread & has letter coded studs - IAPM ES® Listed ER-0373 - AC 193 (from Ø3/8" to 3/4) Tested - Length: 9" - Diameter: 1" - Head Marking: P
$1482.62 /100PC
ADD TO CART
Built for eye, lap and stop sleeve splicing *PLEASE NOTE: Aluminum Sleeves & Stops are not recommended for critical overhead lifting applications
# Options: 5
$14.00 +
#VAN29500004, 1/16"
$14.00 /100PC
ADD TO CART
#VAN29500006, 3/32"
$16.10 /100PC
ADD TO CART
#VAN29500008, 1/8"
$23.00 /100PC
ADD TO CART
#VAN29500012, 3/16"
$45.00 /100PC
ADD TO CART
#VAN29500016, 1/4"
$64.75 /100PC
ADD TO CART
Built for eye, lap and stop sleeve splicing *PLEASE NOTE: Aluminum Sleeves & Stops are not recommended for critical overhead lifting applications
SKU: VAN29500006
Available Online: 500
$14.00 +
For Cable Diameter
PROD #
Price
Screw type expansion anchor - Ideally used for base materials of questionable integrity - Includes die cast sleeves
# Options: 4
$64.90 +
$242.50 /100PC
ADD TO CART
$64.90 /100PC
ADD TO CART
$158.00 /100PC
Call for Availability
$87.00 /100PC
ADD TO CART
Screw type expansion anchor - Ideally used for base materials of questionable integrity - Includes die cast sleeves
$64.90 +
Light Duty - Corrosion Resistant - Non-Conductive - Self-Drilling - Use in 3/8", 1/2" and 5/8" Thick Drywall - Uses a #2 Phillips Screwdriver - For vertical fastening applications
# Options: 1
$300.00
#BLX6400L, Anchor Only
$300.00 /1000PC
ADD TO CART
Light Duty - Corrosion Resistant - Non-Conductive - Self-Drilling - Use in 3/8", 1/2" and 5/8" Thick Drywall - Uses a #2 Phillips Screwdriver - For vertical fastening applications
$300.00
Pkg
PROD #
Price
ONLY FOR MINI UNDERCUT ANCHORS - Drop-In Anchor Setting Tool - For fast installation of DeWalt PFM2111820 3/8" x 3/4" threaded undercut anchors
$9.32 /EA
ADD TO CART
ONLY FOR MINI UNDERCUT ANCHORS - Drop-In Anchor Setting Tool - For fast installation of DeWalt PFM2111820 3/8" x 3/4" threaded undercut anchors
$9.32 /EA
ADD TO CART
Zinc Plated - Tie Wire Head - Carbon Steel Body - For consistent performance in uncracked concrete
# Options: 1
$27.25
#PWR7409SD1, 2"
$27.25 /100PC
ADD TO CART
Zinc Plated - Tie Wire Head - Carbon Steel Body - For consistent performance in uncracked concrete
$27.25
Length
PROD #
Price
Fully Threaded - Torque-Controlled - Zinc Plated Carbon Steel - Includes Nut and Washer - For use consistent performance in cracked and uncracked concrete
# Options: 7
$171.14 +
$171.14 /100PC
ADD TO CART
$193.41 /100PC
ADD TO CART
$207.30 /100PC
ADD TO CART
$236.32 /100PC
ADD TO CART
$256.93 /100PC
ADD TO CART
$312.08 /100PC
ADD TO CART
$395.04 /100PC
ADD TO CART
Fully Threaded - Torque-Controlled - Zinc Plated Carbon Steel - Includes Nut and Washer - For use consistent performance in cracked and uncracked concrete
$171.14 +
DIA.
Length
Info
PROD #
Price
Inserts can be installed in form pours only 3.5" thick - Hex head does not rotate when set - Color coded by size
# Options: 6
$154.08 +
$154.08 /100PC
ADD TO CART
$165.85 /100PC
ADD TO CART
$295.00 /100PC
ADD TO CART
$212.93 /100PC
ADD TO CART
$252.10 /100PC
ADD TO CART
$154.08 /100PC
Call for Availability
Inserts can be installed in form pours only 3.5" thick - Hex head does not rotate when set - Color coded by size
$154.08 +
Thread Diameter
Info
PROD #
Price
Corrosion Resistant - Light-Duty - Tamperproof - Carbon Steel Nail - For use in concrete, block, brick, or stone
# Options: 6
$36.78 +
Corrosion Resistant - Light-Duty - Tamperproof - Carbon Steel Nail - For use in concrete, block, brick, or stone
$36.78 +
UNC Threaded Stud - Torque-Controlled - Zinc Plated Carbon Steel Body w/ Expansion Clip, Nut & Washer - For use in uncracked concrete applications
# Options: 6
$50.56 +
$50.56 /100PC
ADD TO CART
$53.61 /100PC
ADD TO CART
$54.78 /100PC
ADD TO CART
$60.64 /100PC
ADD TO CART
$63.23 /100PC
ADD TO CART
$76.07 /100PC
ADD TO CART
UNC Threaded Stud - Torque-Controlled - Zinc Plated Carbon Steel Body w/ Expansion Clip, Nut & Washer - For use in uncracked concrete applications
$50.56 +
For Bolt Dia.
Length
Info
PROD #
Price
Hangs up to 100 lbs in walls and 50 lbs in ceilings - Simple & easy installation - No pre-drilling - No pre-assembly - Superior hold - Works with 1/2" thick drywall
# Options: 1
$1150.00
#BLX6401, 2-1/8"
$1150.00 /1000PC
ADD TO CART
Hangs up to 100 lbs in walls and 50 lbs in ceilings - Simple & easy installation - No pre-drilling - No pre-assembly - Superior hold - Works with 1/2" thick drywall
$1150.00
Screw L.
Qty Info
PROD #
Price
Fully Threaded - Torque-Controlled - Zinc Plated Carbon Steel - Includes Nut and Washer - For use consistent performance in cracked and uncracked concrete
# Options: 8
$232.74 +
#PWR7440SD1, 4-1/4"
$232.74 /100PC
ADD TO CART
#PWR7441SD1, 4-3/4"
$250.72 /100PC
ADD TO CART
#PWR7442SD1, 5-1/2"
$283.59 /100PC
ADD TO CART
#PWR7444SD1, 6-1/4"
$324.28 /100PC
ADD TO CART
#PWR7446SD1, 7”
$353.39 /100PC
ADD TO CART
#PWR7448SD1, 8-1/2"
$420.42 /100PC
ADD TO CART
#PWR7449SD1, 10"
$492.25 /100PC
ADD TO CART
#PWR7451SD1, 12"
$703.99 /100PC
ADD TO CART
Fully Threaded - Torque-Controlled - Zinc Plated Carbon Steel - Includes Nut and Washer - For use consistent performance in cracked and uncracked concrete
$232.74 +
Length
PROD #
Price
Fully Threaded - Torque-Controlled - Zinc Plated Carbon Steel - Includes Nut and Washer - For use consistent performance in cracked and uncracked concrete
# Options: 3
$32.64 +
#PWR7400SD1, 1-3/4"
$32.64 /100PC
ADD TO CART
#PWR7402SD1, 2-1/4"
$34.95 /100PC
ADD TO CART
#PWR7404SD1, 3-1/4"
$40.33 /100PC
ADD TO CART
Fully Threaded - Torque-Controlled - Zinc Plated Carbon Steel - Includes Nut and Washer - For use consistent performance in cracked and uncracked concrete
$32.64 +
Length
PROD #
Price
