Hitachi Angled Finish Nailer (w/ Acc) - 15 ga - 34° / NT65MA2
PNEUMATIC - 4.4lbs. lightweight and well balanced for ease of use - Selective actuation (ANSI Compliant), allows transition from single actuation to contact actuation
Angled Finish Nailer (w/ Acc) - 15 ga - 34° / NT65MA2
PNEUMATIC - 4.4lbs. lightweight and well balanced for ease of use - Selective actuation (ANSI Compliant), allows transition from single actuation to contact actuation 
Product #: HITNT65MA2
Pls.Call
Available Online: 0
Pre Order Item
Estimated Availability Date:
Estimated Availability Date:
Availability in Store:
Please Call for Special Orders : 778-330-2602
QTY: 
BUY DIRECT
Product Description
The Hitatchi Angled Finish Nailer has the following features:
- 4.4 lbs. lightweight and well balanced for ease of use. Selective actuation n (ANSI Compliant), allows the transition from single actuation to contact actuation
- Depth adjustment, to countersink or flush drive nails
- Air duster clears debris before material installation
The following is included with the tool:
- Safety Glasses
- Hex Bar Wrenches
- Case
- No-Mar Tip
- Brad / Finishing Nailers: Power tools built to drive brad or finishing nails into various materials. These types of nails are excellent for finishing projects like trim and mouldings where the fastener needs to be concealed.
Product Specifications
| Vendor Part #: | NT65MA2 |
| Air Inlet: | [3/8 inch] |
| Fastener Capacity: | approx. 100 nails |
| Fastener Range: | [2-1/2 inches] |
| Fastener Type: | [15 gauge] Angled Finishing Nails |
| Height: | [11.96875 inches] |
| Length: | [13.53125 inches] |
| Nail Loading Type: | Rear |
| Operating Pressure: | [70 psi] - [120 psi] |
| Weight: | [4.4 lbs.] |
| Width: | [3.21875 inches] |
- Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.blackcrowfasteners.com/cs_wiki/wiki/47-i...
