Walter Surface Technologies Grinding Wheel - Aluminum Oxide - Type 27 / 08-B Series *HP™
Aluminum Oxide Grain - 24 Grit - S Hard - Long Wheel Life - 1/4" Thick - ANSI B7-1 - For grinding cast iron and steel
Aluminum Oxide Grain - 24 Grit - S Hard - Long Wheel Life - 1/4" Thick - ANSI B7-1 - For grinding cast iron and steel
Product #: WLT08B510
Options: Arbor: 7/8"; DIA.: 5"; Thickness: 1/4"
Info: MAX RPM 12,200
$7.50 /EA
Login for contractor price
Regular: $7.50 /
WLT08B460 7/8", 4-1/2", 1/4" MAX RPM 13,300 , SoldOut
$6.80 /EA
WLT08B510 7/8", 5", 1/4" MAX RPM 12,200 , InStock
$7.50 /EA
WLT08B600 7/8", 6", 1/4" MAX RPM 10,200 , InStock
$9.35 /EA
WLT08B710 7/8", 7", 1/4" MAX RPM 8,600 , InStock
$11.25 /EA
WLT08B910 7/8", 9", 1/4" MAX RPM 6,600 , InStock
$13.00 /EA
Arbor
DIA.
Thickness
Info
PROD #
Price
7/8"
4-1/2"
1/4"
MAX RPM 13,300
WLT08B460
$6.80 /EA
7/8"
5"
1/4"
MAX RPM 12,200
WLT08B510
$7.50 /EA
7/8"
6"
1/4"
MAX RPM 10,200
WLT08B600
$9.35 /EA
7/8"
7"
1/4"
MAX RPM 8,600
WLT08B710
$11.25 /EA
7/8"
9"
1/4"
MAX RPM 6,600
WLT08B910
$13.00 /EA
Available Online: 201
Pre Order Item
Estimated Availability Date:
Estimated Availability Date:
Availability in Store:
Call for Availability : 778-330-2602
QTY:
BUY DIRECT
WLT08B460 7/8", 4-1/2", 1/4" MAX RPM 13,300
$6.80 /EA
Call for Availability : 778-330-2602
WLT08B510 7/8", 5", 1/4" MAX RPM 12,200
$7.50 /EA
WLT08B600 7/8", 6", 1/4" MAX RPM 10,200
$9.35 /EA
WLT08B710 7/8", 7", 1/4" MAX RPM 8,600
$11.25 /EA
WLT08B910 7/8", 9", 1/4" MAX RPM 6,600
$13.00 /EA
Arbor
DIA.
Thickness
Info
PROD #
Price
7/8"
4-1/2"
1/4"
MAX RPM 13,300
WLT08B460
$6.80 /EA
7/8"
5"
1/4"
MAX RPM 12,200
WLT08B510
$7.50 /EA
7/8"
6"
1/4"
MAX RPM 10,200
WLT08B600
$9.35 /EA
7/8"
7"
1/4"
MAX RPM 8,600
WLT08B710
$11.25 /EA
7/8"
9"
1/4"
MAX RPM 6,600
WLT08B910
$13.00 /EA
Product Description
The Walter HP™ High-Performance Grinding Wheels are built for grinding cast iron and steel and are also good for deburring, preparing weld edges and shaping metal.
Build
Made from superior quality aluminum oxide grain, these wheels are highly resistant to wear and make weld grinding fast with less effort.
It is recommended to grind at a 20° angle for optimal performance and the best finish.
The type 27 wheel shape has a depressed center that allows for grinding without any interference from the flange or mounting hardware.
For use with angle grinders!
- Bonded Abrasives: A bonded abrasive is an assembly of abrasive grains bonded within a matrix to create a solid-like form.
- Depressed Center Wheels: Depressed Center Wheels are similar to Type 1 (Cut-Off) wheels, but the center of the wheel (around the mounting hole) is pushed back (depressed). This depressed center it built to allow grinding on flat surfaces without interference from the flange or mounting hardware.
Product Specifications
Vendor Part #: | 08-B 460 |
Arbor: | [7/8 inch] |
Attachment Type: | Mounting Flange |
Grain: | Aluminum Oxide |
Thickness: | [1/4 inch] |
Type: | 27 |
- √For use on Cast Iron
- √For use on Steel
- √Grinding Metal
- Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.blackcrowfasteners.com/cs_wiki/wiki/47-i...